Advantages of the SK7500

The Stripe HOG SK7500 gives you your choice of ultra-high-pressure pump. It can be fitted with a 7.8 GPM (29.5 LPM) or 9 GPM (34.1 LPM) UHP.

The Stripe HOG features a de-watering system that leaves debris material in a mostly dry state for easy dumping and disposal versus a messy slurry found on competitive trucks

Simultaneous vacuum recovery allows the surface to quickly dry. New pavement markings can typically be applied within 20 minutes after removal.

The Stripe HOG SK7500 is HOG Tusk compatible. The HOG Tusk is a single head that contains PCD grinding teeth and 40,000 PSI water jet nozzles. The HOG Tusk can grind only, water blast only, or perform both functions simultaneously, allowing you to remove markings at twice the speed using only half of the required water.

With clean, potable water and no harsh chemicals, the Stripe HOG SK7500 can retexture runways and restore friction lost due to heavy snow or extreme heat.

Our Stripe HOGs use all stainless steel debris tanks and not steel tanks that are epoxy coated. The debris tanks can tilt up to 60° for easy dumping and do not require any vibration to loosen material.

Simultaneous vacuum recovery allows for immediate emergency landings during the removal process. The SK7500 will shut down and vacate the runway in under 1 minute.

Videos of the SK7500 Applications

The Stripe Hog SK7500 is a water blasting and recovery system designed for either asphalt or concrete airfields and roadways for
paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from
airport runways.

Technical Specs

Operating Pressure40,000 PSI (2,750 BAR)
Flow RateYour Choice: 7.8 GPM (29.5 LPM) or 9 GPM (34.1 LPM)
Fresh Water Capacity1,200 Gallons (4,542 Liters)
Debris Tank Capacity750 gal (2,839 liters)
Debris Tank w/Bladder Bag Capacity1,950 gal (7,457 liters)
Blasting Widths6”-48” (15.2-121.92 cm)
Marking Removal Rate5,557 linear ft/hr (1,693 linear meters/hr)
Rubber Removal Rate30,000 sq. ft. per hour (2787 m2/hr)
Vacuum4" 750 CFM (7.8) or 6" 1,400 CFM (9.8)
Hog Tusk CompatibleNo

Request the SK7500 Specification Sheet

Get the SK7500 specification sheet that you can print and save to your computer for review at any time. A great tool for model comparisons and for comparing the Stripe Hog to other manufacturer's equipment. Specification sheets contain:

  • Complete Model Specifications
  • List of Model Options
  • List of Model Applications
Stripe Hog SK7500 Spec Sheet