Advantages of the SK3000

The Stripe Hog SK3000 comes on a skid that can be mounted to the chassis of your choice. It is powered by an auxiliary motor so there is no need to integrate it with the chassis. In addition, it comes with our HT2500 Hog Rider, allowing you to operate up to 300 feet (91.44 meters) away from the equipment.


Simultaneous vacuum recovery allows the surface to quickly dry. New pavement markings can typically be applied within 20 minutes after removal.


The Stripe HOG features a de-watering system that leaves debris material in a mostly dry state for easy dumping and disposal versus a messy slurry found on competitive trucks

With clean, potable water and no harsh chemicals, the Stripe HOG SK3000 can retexture runways and restore friction lost due to heavy snow or extreme heat.


The SK3000 will shut down and vacate the runway in under 1 minute.

Videos of the SK3000 Applications

The Stripe Hog SK3000 is a water blasting and recovery system designed for either asphalt or concrete airfields and roadways for paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from airport runways.

Technical Specs

Operating Pressure40,000 PSI (2,750 bar)
Flow Rate7.8 gpm (27.6 lpm)
Fresh Water Capacity1,050 gal (3,975 liters)
Debris Tank Capacity1,200 gal (4,542 liters)
Debris Tank w/Bladder Bag Capacity2,250 gal (8,517 liters)
Blasting Widths6"- 48" (15.2 cm - 121 cm)
Marking Removal Rate4,225 linear ft/hr (1,288 linear meters per hour.)
Rubber Removal Rate26,000 sq. ft/hr (2,415 m2/hr)
Vacuum4" 750 CFM or 6" 1,400 CFM
Hog Tusk CompatibleNo

Request THE SK3000 SPECIFICATION SHEET

Get the SK3000 specification sheet that you can print and save to your computer for review at any time.

A great tool for model comparisons and for comparing the Stripe Hog to other manufacturer's equipment. 

Stripe Hog SK3000 Spec Sheet