Advantages of the SK2000

The Stripe HOG SK2000 can use optional bladder bags, allowing you to store dirty water in the same footprint as the freshwater tanks. As freshwater levels decrease due to usage, the bladder bags fill and occupy the empty space.


The Stripe HOG features a de-watering system that leaves debris material in a mostly dry state for easy dumping and disposal versus a messy slurry found on competitive trucks


Simultaneous vacuum recovery allows the surface to quickly dry. New pavement markings can typically be applied within 20 minutes after removal.


The Stripe Hog SK2000 can be mounted to an Isuzu FTR chassis. It is powered by an auxiliary motor so there is no need to integrate it into the chassis. In addition, the SK2000 can be mounted to a trailer or a skid to place on the chassis of your choice.

With clean, potable water and no harsh chemicals, the Stripe HOG SK2000 can retexture runways and restore friction lost due to heavy snow or extreme heat.


Our Stripe HOGs use all stainless steel debris tanks and not steel tanks that are epoxy coated. The debris tanks can tilt up to 60° for easy dumping and do not require any vibration to loosen material.


Simultaneous vacuum recovery allows for immediate emergency landings during the removal process. The SK2000 will shut down and vacate the runway in under 1 minute.

Videos of the SK2000 Applications

The Stripe Hog SK2000 is a water blasting and recovery system designed for either asphalt or concrete airfields and roadways for paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from airport runways.

Technical Specs

Operating Pressure40,000 PSI (2,750 bar)
Flow Rate5.6 gpm (21.2 lpm)
Fresh Water Capacity600 gal (2,271 liters)
Debris Tank Capacity750 gal (2,839 liters)
Debris Tank w/Bladder Bag Capacity1,350 gal (5,110 liters)
Blasting Widths (Chassis)6"-24" (15.2-60.96 cm)
Blasting Widths (Trailer)6"-14" (15.2-35.5 cm)
Marking Removal Rate3,033 linear ft/hr (924 linear meters per hour)
Rubber Removal Rate19,000 sq. ft/hr (1,765 m2/hr)
Vacuum4" 750 CFM
Hog Tusk CompatibleNo

Request THE SK2000 SPECIFICATION SHEET

Get the SK2000 specification sheet that you can print and save to your computer for review at any time. A great tool for model comparisons and for comparing the Stripe Hog to other manufacturer's equipment. Specification sheets contain:

  • Complete Model Specifications
  • List of Model Options
  • List of Model Applications
Stripe Hog SK2000 Spec Sheet