Advantages of the SK15

The Stripe HOG SK15 can use optional bladder bags, allowing you to store dirty water in the same footprint as the fresh water tanks. As fresh water levels decrease due to usage, the bladder bags fill and occupy the empty space.

The Stripe HOG features a de-watering system that leaves debris material in a mostly dry state for easy dumping and disposal versus a messy slurry found on competitive trucks

Simultaneous vacuum recovery allows the surface to quickly dry. New pavement markings can typically be applied within 20 minutes after removal.

With the ability to use two blasting heads, the Stripe HOG SK15 can simultaneously remove parallel markings or rapidly remove single, continuous lines. Each head's RPM can be independently controlled.

The Stripe HOG SK15 is HOG Tusk compatible. The HOG Tusk is a single head that contains PCD grinding teeth and 40,000 PSI water jet nozzles. The HOG Tusk can grind only, water blast only, or perform both functions simultaneously, allowing you to remove markings at twice the speed using only half of the required water.

With clean, potable water and no harsh chemicals, the Stripe HOG SK15 can retexture runways and restore friction lost due to heavy snow or extreme heat.

Simultaneous vacuum recovery allows for immediate emergency landings during the removal process. The SK15 will shut down and vacate the runway in under 1 minute.

Our Stripe HOGs use all stainless steel debris tanks and not steel tanks that are epoxy coated. The debris tanks can tilt up to 60° for easy dumping and do not require any vibration to loosen material.

Videos of the SK15 Applications

The Stripe Hog SK15 is an auxiliary engine-driven water blasting and recovery system designed for either asphalt or concrete airfields and roadways for paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from airport runways.

Technical Specs

Operating Pressure40,000 PSI (2,750 bar)
Flow Rate15 gpm (58 lpm)
Fresh Water Capacity3,150 Gallons (11,924 Liters)
Debris Tank Capacity1,800 gal (6,813 liters)
Debris Tank w/Bladder Bag Capacity4,950 gal (18,737 liters)
Blasting Widths6"-96" (15.2-243.84 cm)
Marking Removal Rate7,500 linear ft/hr (2,286 linear meters per hour).
Rubber Removal Rate50,000 sq. ft/hr (4,645 m2/hr)
Vacuum8" 2,350 CFM
Hog Tusk CompatibleYes


Get the SK15 specification sheet that you can print and save to your computer for review at any time. A great tool for model comparisons and for comparing the Stripe Hog to other manufacturer's equipment. Specification sheets contain:

  • Complete Model Specifications
  • List of Model Options
  • List of Model Applications
Stripe Hog SK15 Spec Sheet