Simultaneous vacuum recovery allows the surface to quickly dry. New pavement markings can typically be applied within 20 minutes after removal.
The Stripe HOG features a de-watering system that leaves debris material in a mostly dry state for easy dumping and disposal versus a messy slurry found on competitive trucks
The Stripe HOG SH7500 can use optional bladder bags, allowing you to store dirty water in the same footprint as the freshwater tanks. As freshwater levels decrease due to usage, the bladder bags fill and occupy the empty space.
With clean, potable water and no harsh chemicals, the Stripe HOG SH7500 can retexture runways and restore friction lost due to heavy snow or extreme heat.
The SH7500 will shut down and vacate the runway in under 1 minute.
The Stripe HOG SH7500 is HOG Tusk compatible. The HOG Tusk is a single head that contains PCD grinding teeth and 40,000 PSI water jet nozzles. The HOG Tusk can grind only, water blast only, or perform both functions simultaneously, allowing you to remove markings at twice the speed using only half of the required water.
The Stripe Hog SH7500 is a water blasting and recovery system designed for either asphalt or concrete airfields and roadways for
paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from
airport runways.
The Hog Tusk attaches to a variety of Stripe Hogs. Using a combination of grinding teeth and water blasting nozzles, it uses 1/2 the water and gives 2x the performance.
The Ground Hog is a walk-behind blasting tool which allows you to remove markings up to 300’ away from the Stripe Hog. It is also available in a self-rotated model that does not require electrical, hydraulic, or pneumatic power.
The Hog Rider is mounted to John Deere 2500B tractor which allows the operator to remove markings up to 300’ away from the Stripe Hog.
These tanks contain a rubber bladder which will fill with dirty water as the clean water level decreases, giving you additional dirty water storage, extending runtime considerably.
Three 16" spray bars or Three 12" under one head gives you a wide blasting path perfect for road retexturing, paint/thermoplastic removal or airfield/runway rubber removal.
Two 12" spray bars under one head gives you a 24" wide blasting path perfect for paint or thermoplastic removal, road retexturing or airfield/runway rubber removal.
Get the SH7500 specification sheet that you can print and save to your computer for review at any time.
A great tool for model comparisons and for comparing the Stripe Hog to other manufacturer's equipment.
