Local service and support no matter where in the world you may call home. The Stripe Hog SH24.0 is available on the chassis below.
Highway and Service Roads11 ft (3.5 m) path for road retexturing.
Up to 24.0 gpm (90.8 lpm)
The fastest removal rates in the industry.
Removes thermoplastic at 13,000 linear feet per hour (3,962.4 linear meter/hr).
Double the vacuum performance of an SH8000 comes standard with the option of triple the vacuum performance.
Simultaneous removal of parallel markings with optional guidance package.
Rapid removal of single, continuous lines.
Cleaning and rejuvenation of the retro-reflectivity of thermoplastic and cold plastic markings.
Simultaneous vacuum recovery allows for the application of new markings in 20 minutes.
Airports and RunwaysRubber removal rates up to 60,000 sq. ft. per hour (5,574 m2/hr) on asphalt and concrete runways.
Rapid cleaning and rejuvenation of runway centerline marking retro-reflectivity dramatically reduces the frequency of centerline painting.
Runway retexturing in extreme hot climates where friction is lost because of asphalt bleeding.
Runway retexturing in climates with heavy snow and ice where snow removal brooms polish the surface of the runway.
Simultaneous vacuum recovery allows for immediate emergency landings during the removal process. The SH24.0 will shut down and vacate the runway in under 1 minute.
The best runway maintenance equipment available.
The Stripe Hog SH24.0 is a water blasting and recovery system designed for either asphalt or concrete airfields and roadways for paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from airport runways.
Local service and support no matter where in the world you may call home. The Stripe Hog SH24.0 is available on the chassis below.
Scania 10x4
Volvo VNX
The Hog Tusk attaches to a variety of Stripe Hogs. Using a combination of grinding teeth and water blasting nozzles, it uses 1/2 the water and gives 2x the performance.
The Ground Hog is a walk-behind blasting tool which allows you to remove markings up to 300’ away from the Stripe Hog. It is also available in a self-rotated model that does not require electrical, hydraulic, or pneumatic power.
These tanks contain a rubber bladder which will fill with dirty water as the clean water level decreases, giving you additional dirty water storage, extending runtime considerably.
The Scissor Lift High Dump extends 12’ into the air and allows you to easily dump debris on the side of the road, into a dumpster, or at a designated location.
Get the SH24.0 specification sheet that you can print and save to your computer for review at any time. A great tool for model comparisons and for comparing the Stripe Hog to other manufacturer's equipment. Specification sheets contain:
