Advantages of the Grinder Hog GH2.0

The Grinder Hog GH2.0 features grinder heads on each side of the truck that is capable of extending outward up to 36” from the chassis.


The grinder head supports PCD teeth available in full round, double round, and full flat for different finish profiles.


The Grinder Hog GH2.0 does not require a CDL license to operate.


With our Low-Speed Control, the Grinder Hog GH2.0 can grind at speeds up to 8 MPH without having to check between the crosshairs and the speedometer, greatly reducing the margin for error.

The Grinder Hog GH2.0 comes with a computer-controlled profiling (or CCP) package for on-the-fly adjustment of your skip line or recessed reflective pattern.


The simultaneous vacuum recovery system of the Grinder Hog GH2.0 utilizes a 2,200 CFM positive displacement blower, and pollution control technology (PCT) to control noise and dust. The debris is then stored in a 4.5 cubic yard (usable) debris tank, keeping the machine compliant with Airborne Silica guidelines set forth by the EPA.

Videos of the Grinder Hog GH 2.0 Applications

With heads on both sides of the truck, center line and shoulder work can be performed simultaneously. In addition, road reflectors can be removed and vacuumed so there's no need to remove them prior to the job.

Technical Specs

Grinder Heads13" (33 cm) Cut Width
Vacuum Recovery1x 2,200 cfm 8" blowers
Debris Tank4.5 Cubic Yards (Usable)
Low-Speed ControlUp to 8 MPH (12.87 KPM)
Filter141 sq. ft. of 10 micron

Request the Grinder Hog GH2.0 Specifications Sheet

Get the Grinder Hog GH2.0 specifications sheet that you can print and save to your computer for review at any time. A great tool for model comparisons and for comparing the Grinder Hog GH2.0 to other manufacturers' equipment. Specifications sheet contains:

  • Complete Model Specifications
  • List of Model Options
  • List of Model Applications
Grinder Hog GH2.0 Spec Sheet