Call us today 1-772-214-1714 0
PTO Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths: up to 144" (365 cm)
PTO Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 96" (15.2 cm - 243.84 cm). Mount to chassis or trailer
PTO Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 48". (15.2 cm - 121.92 cm)
PTO Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 48" (15.2 cm - 121.92 cm)
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 96" (15.2 cm - 243.84 cm). Mount to chassis or trailer
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 48" (15.2 cm - 121.92 cm)
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6”-24” (15.2-60.96 cm)
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 48" (15.2 cm - 121.92 cm). Mount to chassis or trailer
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting width: 14" (20.3 cm - 35.5 cm)
Up to 12,000 lbs/hr (5,443 kg/hr) melting rate. Under 1-hour startup. Instant shut down.
Up to 8,000 lbs/hr (3,628 kg/hr) melting rate. Under 1-hour startup. Instant shut down.
The Epoxy Hog is an epoxy resin striping truck capable of striping up to 8 MPH @ 20 mil. thickness
The Epoxy Hog Jr is a Non-CDL epoxy resin striping truck that can apply lines either individually or simultaneously.
600 lb kettle, 8 CFM compressor @125 psi, 4", 8", and 12" combo ribbon application
Thermo Pre-melters with lateral tanks nested within the flatbed of the truck. Up to 4,400 lbs. material capacity.
80 gal paint tanks, two 500 lbs bead tanks, 115 cfm air compressor
The Crash Hog is a chassis-mounted or towable attenuator
Grinding and grooving at speeds up to 8 MPH (12.87 KPH) with full debris recovery.
Grinding and grooving at speeds up to 8 MPH (12.87 KPH) with full debris recovery. No CDL.
3-in-1 machine for Grinding, Grooving, and Rumble Strips.
32" broom width, 140hp diesel auxiliary engine, 400 gal water capacity, 100 gal fuel capacity
7,250 PSI (499 BAR) @ 7.9 GPM (29.9 LPM). 610 gal (2,309 liter) fresh water tank, 132 gal (499 liter) debris tank. Blasting width 36" (91.4 cm).
The Hog Tusk attaches to a variety of Stripe Hogs. Using a combination of grinding teeth and water blasting nozzles, it uses 1/2 the water and gives 2x the performance.
40,000 PSI (2,750 BAR) @ 9 GPM (34 LPM). 800 CFM. Up to 300' (91.44 m) Operational distance. Blasting widths 6"-22" (15.2-55.8 cm) (HT1000) or 14" (35.5 cm) (HT1000SR)
Up to 9 GPM (34 LPM). Blasting width 6" - 48" (15.2-121.92 cm). Up to 300' (91.4 m) Operational Distance.
40,000 psi (2,750 bar) @ 6 gpm (22 lpm) . blasting width 8" (20.3 cm). Hydraulic Power. 12-15lbs (5-7 kg).
