Call us today 1-772-214-1714 0
PTO Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths: up to 144" (365 cm)
PTO Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 48" (15.2 cm - 121.92 cm). Mount to chassis or trailer
PTO Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 48". (15.2 cm - 121.92 cm)
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 48" (15.2 cm - 121.92 cm)
PTO Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 48" (15.2 cm - 121.92 cm)
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6”-24” (15.2-60.96 cm)
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting widths 6" - 24" (15.2 cm - 60.96 cm). Mount to chassis or trailer
Auxiliary Engine-Driven 40,000 PSI (2,750 Bar) Blasting width: 14" (20.3 cm - 35.5 cm)
Up to 12,000 lbs/hr (5,443 kg/hr) melting rate. Under 1-hour startup. Instant shut down.
Up to 8,000 lbs/hr (3,628 kg/hr) melting rate. Under 1-hour startup. Instant shut down.
The Epoxy Hog is an epoxy resin striping truck capable of striping up to 8 MPH @ 20 mil. thickness
400-600 lb kettle, 8 CFM compressor @125 psi, 4", 8", and 12" combo ribbon application
Thermo Pre-melters with lateral tanks nested within the flatbed of the truck. Up to 4,400 lbs. material capacity.
75% smaller and 371 lbs (168 kg) lighter than the competitive pump. Fits onto most thermoplastic trucks with no modification to hydraulics
Grinding and grooving at speeds up to 8 MPH (12.87 KPH) with full debris recovery.
Grinding and grooving at speeds up to 8 MPH (12.87 KPH) with full debris recovery. No CDL.
3-in-1 machine for Grinding, Grooving, and Rumble Strips.
32" broom width, 140hp diesel auxiliary engine, 400 gal water capacity, 100 gal fuel capacity
7,250 PSI (499 BAR) @ 7.9 GPM (29.9 LPM). 610 gal (2,309 liter) fresh water tank, 132 gal (499 liter) debris tank. Blasting width 36" (91.4 cm).
The Hog Tusk attaches to a variety of Stripe Hogs. Using a combination of grinding teeth and water blasting nozzles, it uses 1/2 the water and gives 2x the performance.
40,000 PSI (2,750 BAR) @ 9 GPM (34 LPM). 800 CFM. Up to 300' (91.44 m) Operational distance. Blasting widths 6"-22" (15.2-55.8 cm) (HT1000) or 14" (35.5 cm) (HT1000SR)
Up to 9 GPM (34 LPM). Blasting width 6" - 48" (15.2-121.92 cm). Up to 300' (91.4 m) Operational Distance.
40,000 psi (2,750 bar) @ 6 gpm (22 lpm) . blasting width 8" (20.3 cm). Hydraulic Power. 12-15lbs (5-7 kg).
5.1-12 GPM (19.3-45.4 LPM), Attach up to 2 Hog Tools, Optional vacuum recovery from 800-1,400 CFM.
