Advantages of the SK5500

Highway and Service Roads

Pavement marking removal rates up to 4,225 linear ft/hr (1,288 linear meters per hour.)

Rapid removal of single, continuous lines.

Cleaning and rejuvenation of the retro-reflectivity of thermoplastic and cold plastic markings.

Simultaneous vacuum recovery allows for the application of new markings in 20 minutes.

Airports and Runways

Rubber removal rates up to 26,000 sq. ft/hr (2,415 m2/hr) on asphalt and concrete runways.

Rapid cleaning and rejuvenation of runway centerline marking retro-reflectivity dramatically reduces the frequency of centerline painting.

Runway retexturing in extremely hot climates where friction is lost because of asphalt bleeding.

Runway retexturing in climates with heavy snow and ice where snow removal brooms polish the surface of the runway.

Simultaneous vacuum recovery allows for immediate emergency landings during the removal process. The SK5500 will shut down and vacate the runway in under 1 minute.

Videos of the SK5500 Applications

The Stripe Hog SK5500 is a water blasting and recovery system designed for either asphalt or concrete airfields and roadways for paint and thermoplastic removal, surface preparation, road retexturing, hydraulic spill cleanup, and removal of rubber deposits from airport runways.

Technical Specs

Operating Pressure40,000 PSI (2,750)
Flow Rate7.8 gpm (27.6 lpm)
Fresh Water Capacity1,200 gal (4,542 liters)
Debris Tank Capacity750 gal (2,839 liters)
Blasting Widths6" - 22" (15.2 - 55.8 cm)

Request the SK5500 Specification Sheet

Get the SK5500 specification sheet that you can print and save to your computer for review at any time. A great tool for model comparisons and for comparing the Stripe Hog to other manufacturer's equipment. Specification sheets contain:

  • Complete Model Specifications
  • List of Model Options
  • List of Model Applications
Stripe Hog SK5500 Spec Sheet